Show Some Love!

Free Starbucks Inspired Disney Maleficent SVG

How many layers of vinyl can you layer?

I have layered as many as 5-6 layers on 1 project, the thing to keep in mind is that your design gets thicker with each layer. Also, some types of vinyl are thicker to it may take fewer layers to get to where its no longer attractive.

Can you layer vinyl on top of glitter vinyl?

Glitter has grains, which make it hard to layer on top of it, however, you can layer glitter vinyl over top of the regular adhesive.

I love a good and cheap project and this one will cost you less than $3 to make each 1! Yup, these are dollar tree mugs, and I just removed the words that were on the front and made it my own.

I can not live without coffee so these are one of my favorite things to make. Well, I love doing cups in general. I bet youre tired of hearing me talk, so let’s get to it!

Grab The Disney Maleficent SVG

Grab The Witches Brew SVG

If you are looking for more projects with adhesive vinyl, you should check out my Cricut Halloween Doormat its a really fun and easy project.

Yield: 1

How To Layer Vinyl Plus Free Starbucks Coffee Inspired SVG

Prep Time: 10 minutes

Active Time: 10 minutes

Total Time: 20 minutes

Layering vinyl is pretty easy, people tend to overthink it. I have made it extra easy in my Free Starbucks Inspired Disney Maleficent SVG, I made sure it has registration marks so you can easily overlap the layers.

Print

Materials

• Permanente Adhesive Vinyl
• Transfer Tape
• Squeegee/Scraper
• Reusable Plastic Coffee Cups
• Acetone
• Cotton or Paper towel
• Weeding Tool

Tools

• Cricut Machine

Instructions

1. Gather all of your supplies
2. Apply the acetone to your paper towel or cotton and remove the words from the cup using a circular motion
3. In your cutting program resize the images to 4 inches and cut
4. Remove from the mat and weed out the voided areas
5. It should look like these when you are done
6. Cut a piece of transfer paper just large enough to cover your design
7. Grab 1 layer of the design
8. Place it over your design
9. Use your scraper to remove the air between the design and the transfer paper
10. Next, grab the other piece of your design line up the registration marks between the 2 layers
11. Repeat step 8
12. Your vinyl is now layered the way it should look on your cup
13. Remove the paper backing by gently peeling it away
14. Place the design onto your cup, I like to secure the middle then 1 side at a time
15. Again use the scraper to transfer the vinyl from the transfer sheet onto the cup
16. Hand wash only

Show Some Love!