Skip to Content

Mandala SVG For A Custom Starbucks Cup

Show Some Love!

I wanted a mandala for my Starbucks Cold Cup and couldn’t find a free mandala for my reusable cup. So I made this Mandala SVG for a custom Starbucks cup.

I carry my Starbucks logo cup almost everywhere I go. But I use it most in my craft room. So I needed something with a pop.

hand pulling transfer tape off of red permanent adhesive vinyl

Starbucks Cold Cup SVG

Mandalas have become pretty popular especially with the growing popularity of the Cricut and other cutting machines.

My flower mandala SVG file for Cricut comes sized for customizing your Starbucks cup. You also get 4 file types, SVG, Dxf file, png, and eps cut files.

Making it perfect to use with any cutting machines whether it’s the silhouette cameo, Cricut machine, Brother Scan and cut, or something else.

This SVG file also comes as a set of 2 files 1 with the circle already missing and another that is a whole mandala. Same design but visually different.

After that first custom Starbucks cup. I have made a ton using my mandala svg. 

hand pulling transfer tape off of red permanent adhesive vinyl

This Starbucks svg files were created in Adobe Illustrator. I enjoy making SVG cut files for Shop by Pink.

The problem with most free SVG files is that there is no commercial license and you can’t really, legally make things to sell with the files.

My next mandala SVG project is going to be for a paper craft. I want to make a layered shadowbox with a mandala that will sit on top of a floating shelf.

hand pulling transfer tape off of red permanent adhesive vinyl

If you are looking for free projects to make with your Cricut Machine. Check these out.

Mandala SVG

hand pulling transfer tape off of red permanent adhesive vinyl
Yield: 1-2

How To Place A Mandala SVG For A Custom Starbucks Tumbler

Prep Time: 5 minutes
Active Time: 20 minutes
Total Time: 25 minutes
Difficulty: Intermediate
Estimated Cost: $10

I made this Mandala SVG for a custom Starbucks cup for a customer. And was ecstatic at the way her custom Starbucks cup came out.

Materials

Tools

Instructions

  1. Purchase the file, you should instantly receive it on the checkout page and also emailed to you.
  2. Upload the file into Cricut Design Space.
  3. Resize if needed, depending on what you are putting the mandala.
  4. Add your vinyl onto your sticky mat.
  5. Load the machine.
  6. Choose the vinyl setting and press cut.
  7. Weed the vinyl, looking at the image if you need a guide, use the nail polish holder to remove the small bits of vinyl from the weeder.
  8. Once weeded use transfer tape to transfer the image onto your cup or other material.

Did you make this project?

Please leave a comment on the blog or share a photo on Facebook

Show Some Love!

Previous
DIY Baby Shower Gifts To Make With Your Cricut
yellow orange and teal paper roses
Next
How To Make A Paper Rose + Free Rolled Flower Template

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Skip to Instructions